PE bags for inner package,cartons for external package
1.Low Friction Seal
2.avoid twisting in the groove
3.used for a wide range of fields
4.can totally replace o-ring
Features and Advantages of X-RING:
1.The four lobed design provides twice the sealing surface of a standard O-RING.
2.Because of the double-sealing action,less squeeze is required to maintain an effective seal.The reduction in squeeze means less friction and wear which will increase service life and reduce maintenance costs.
3.Very good sealing efficiency. Due to an improved pressure profile over the X-Ring cross-section, a high sealing effect is achieved.
4.The X-RING fits into grooves designed for an o-ring so there should be limited problems retrofitting the seal.
5.Unlike an O-Ring, the mould line flash lies in the trough, between and away from the critical sealing lips.
1.for sealing of reciprocating pistons, rods, plungers, etc;
2.for sealing oscillating, rotating or spiral movements on shafts, spindles, rotary transmission leadthroughs, etc.
1.as a radial-static seal, e.g. for bushings, covers, pipes, etc;
2.as an axial-static seal, e.g. for flanges, plates, caps, etc;
3.as an energizer element for elastomer energized hydraulic seals where there is a risk of the O-Ring .